994K wheel loader

Wheel loaders (CAT)

Cat® large wheel loaders are designed to deliver maximum service life and ensure optimal availability over multiple life cycles. With optimized performance and simplified maintenance, our machines allow you to move more material more safely and efficiently, at a lower cost per ton.
First introduced in 1990, the 994 wheel loader has been the customer's favorite machine in its class for 25 years. Motivated by customer satisfaction and success, we are constantly striving to design new series that continue the tradition of reliability, safety, operator comfort, ease of maintenance, and sustainability.
All images included in this Specalog show a configuration equivalent to EPA Tier 1 standards for the United States/Stage I for the European Union. It is important to note that the configuration equivalent to Tier 4 Final/Stage V standards for the European Union will have different characteristics, including the presence of a DEF tank.

Net power	1,297 kW
Bore	170 mm
Race	8.5 inches
Engine displacement	78.1 l
Gross power - SAE J1995:2014	1,394 kW
Maximum torque (1200 rpm) - SAE J1995	11,591 N·m
Gross power – ISO 14396	1,377 kW
Net power - SAEJ1349 - Standard ambient temperature	1,297 kW
Operating weight	242,605 kg
Nominal payload: standard lifting (moderate to high excavation resistance)	40.8 tons
Rated payload: standard lifting (low to moderate excavation resistance)	54.4 t
Rated payload: high lift height (moderate to high excavation resistance)	38.1 t
Rated payload: high lift height (low to moderate excavation resistance)	49.9 t
Forward gear - 1	7.4 km/h
Forward gear – 2	12.9 km/h
Forward gear – 3	21.9 miles per hour
Reverse gear – 1	8.1 km/h
Reverse gear – 2	14.1 km/h
Reverse gear – 3	24 km/h
Direct drive - Forward 3	24.5 km/h
Direct drive - Reverse 3	27 km/h
Direct drive - Forward 2	14 km/h
Direct connection - Reverse 2	15.5 km/h
Adjusting the relief valve - Lifting/tilting	32,500 kPa
Maximum flow rate at an engine speed of 1700 rpm	2047 l/min
Lifting	12.6 s
Emptying	3.1 s
Recovery	4.9 s
Lowering in free position	4.2 s
Hydraulic reservoir: steering and braking	379 l
Transmission	416 l
Fuel tank, standard	3445 l
Hydraulic reservoir: equipment and hydraulic fan	1022 l
Motor housing	288 l
Cooling circuit	520 l
Fuel tank, with 24-hour equipment	5678 l
Differential - Gearboxes - Rear	757 l
Differential - Gearboxes - Front	833 l
Driver noise level (ISO 6396:2008): equivalent to European Tier 1/Stage I	72 dB(A)
Machine sound level (ISO 6395:2008)	119 dB(A)
Sound level for the driver (ISO 6396:2008): Tier 4 Final/Stage IV for the European Union*	72 dB(A)
Maximum flow rate at an engine speed of 1700 rpm	980 l/min
Adjusting the relief valve: direction	31,000 kPa
Oil replacement system (ORS)*	75.7 l
Variable speed hydraulic fan, ambient temperature capacity – Standard	43 °C
From the front axle to the end of the bucket	6503 mm
Dump height at maximum lift	6167 mm
From the ground to the top of the ROPS frame	7118.5 mm
Maximum overall length	19,508 mm
Maximum overall height - Bucket raised	11771 mm
Reach - Maximum lift	2688 mm
Ground clearance relative to the bottom of the joint	898 mm
Reach - Maximum lift	2821 mm
From the ground to the top of the exhaust pipes	7067 mm
Maximum overall length	20102 mm
Ground clearance relative to the bumper	53 inches
Diesel exhaust fluid (DEF) (Tier 4 Final/Stage IV)	519 l
Bandwidth	4300 mm
Variable speed hydraulic fan at ambient temperature: high* (Tier 4 Final)	53 °C
Ground clearance relative to the bumper	53 inches
Dump height at maximum lift	7095 mm
Sound level for the driver (ISO 6396:2008): Tier 4 Final/Stage IV for the European Union*	71 dB(A)
From the rear axle to the bumper	6205 mm
Width excluding tires, with protrusion	5758 mm
From the ground to the center of the axles	1820 mm
Variable speed hydraulic fan with ambient temperature capacity: high (Tier 1 equivalent)	93 °F
Steering cycle time – Idle speed	7.6 s
Wheelbase	6800 mm
Machine sound level (ISO 6395:2008)	117 dB(A)
Steering cycle time - Maximum idle speed	4.3 s
Maximum overall height - Bucket raised	12,545 mm
From the ground to the top of the hood	5682 mm
Width excluding tires, with protrusion	5760 mm
Total hydraulic cycle time (empty bucket)	23.5 s
From the ground to the center of the axles	1820 mm
Net power - SAEJ1349 - High ambient temperature	1,265 kW
Bandwidth	4300 mm
Bucket pivot height – Maximum lift	8790 mm
Bucket pivot height – Maximum lift	9647 mm
From the ground to the top of the exhaust pipes	7067 mm
From the rear axle to the bumper	6205 mm
From the front axle to the end of the bucket	7097 mm
Ground clearance relative to the bottom of the joint	898 mm
From the ground to the top of the hood	5682 mm
Wheelbase	6800 mm
From the ground to the top of the ROPS frame	7118.5 mm
Driver noise level (ISO 6396:2008): equivalent to European Tier 1/Stage I	71 dB(A)

Whether you need a loader for landscaping, agriculture, construction, waste management, forestry, or mining applications, Cat® wheel loaders ensure safety, speed, precision, and efficiency for all your material handling and loading tasks.