992K wheel loader

Wheel loaders (CAT)

Caterpillar first introduced its 992 model in 1968. Since then, this large wheel loader has been the flagship of its sector, considered a safe, productive, and robust front loader. With the introduction of the K Series, we have optimized the operator experience and the safety of people working on and around the machine. With standard and high lift configurations, this machine has been developed to work in conjunction with fleets of 775, 777, and 785 dump trucks. If your business relies on the 992 as a loading tool, you will find everything you need in the 992K model: safety, productivity, cost control, and comfort for your employees.

Net power	607 kW
Bore	145 mm
Race	6.4 inches
Engine displacement	32.1 l
Emissions (U.S. EPA Tier 4 Final standard): rated speed	1,750 rpm
Emissions (Tier 2 equivalent): gross power - SAE J1995	676 kW
Emissions (U.S. EPA Tier 4 Final standard): net power, SAE J1995	607 kW
Emissions (U.S. EPA Tier 4 Final standard): net power, SAE J1349	607 kW
Emissions (Tier 2 equivalent): net power, SAE J1349	607 kW
Emissions (U.S. EPA Tier 4 Final standard): maximum torque at 1,200 rpm, SAE J1995	4765 N·m
Emissions (U.S. EPA Tier 4 Final standard): gross power - SAE J1995	671 kW
Emissions (Tier 2 equivalent): maximum torque at 1,200 rpm, SAE J1995	4796 N·m
Operating weight	99,831 kg
Rated payload: high lift height (moderate to high excavation resistance)	19.1 t
Nominal payload: standard lifting (moderate to high excavation resistance)	21.7 tons
Forward gear - 1	6.9 km/h
Forward gear – 2	11.9 km/h
Forward gear – 3	20.3 km/h
Reverse gear – 1	7.6 km/h
Reverse gear – 2	13.1 km/h
Reverse gear – 3	22.2 km/h
Direct drive - Forward 3	22.8 km/h
Direct connection - Reverse 2	14.2 km/h
Direct drive – Reverse 1	7.9 km/h
Direct drive - Reverse 3	24.8 km/h
Direct drive - Forward 2	12.9 km/h
Maximum flow rate at 1,850 rpm	960 l/min
Adjusting the relief valve - Lifting/tilting	31,000 kPa
Lifting cylinder - Stroke	45.5 inches
Tilt cylinder - Bore	10.3 inches
Lifting cylinder - Bore	11.1 inches
Emptying	1.8 s
Lowering in free position	3.7 s
Lifting	9.4 s
Recovery	4.4 s
Maximum flow rate at 1,350 rpm	360 l/min
Steering cut-off pressure	31,000 kPa
Total hydraulic cycle time	19.3 s
Fuel tank	1562 l
Transmission	169 l
Emissions (U.S. EPA Tier 4 Final standard): gross power, ISO 14396	659 kW
From the ground to the top of the ROPS frame	5678 mm
From the ground to the top of the exhaust pipes	5248 mm
Air conditioner oil	0.268 l
Ground clearance relative to the bumper	45.9 inches
Cooling circuits	290 l
Refrigerant for air conditioner	2.72 kg
Bandwidth	13' 11.5"
From the ground to the top of the hood	4043 mm
Motor housing	120 l
Ground clearance relative to the bottom of the joint	27 inches
Operating weight: standard	99,831 kg
Tilt cylinder - Stroke	2055 mm
Differential - Gearboxes - Front	360 l
Steering cycle time - Maximum idle speed	4.4 s
Differential - Gearboxes - Rear	345 l
Operating weight - high lift height	100,628 kg
Dump height with 45° dump (tip of teeth)	178 inches
Hydraulic system - Equipment	326 l
Maximum overall length	15,736 mm
Bucket pivot height – Maximum lift	27 feet
Dump height with 50° dump (tip of teeth)	4480 mm
Wheelbase	5890 mm
Steering cycle time – Idle speed	6.4 s
Emissions (Tier 2 equivalent): gross power, ISO 14396	659 kW
Maximum overall height - Bucket raised	9313 mm
Emissions (Tier 2 equivalent): rated speed	1,750 rpm
Emissions (Tier 2 equivalent): net power, SAE J1995	607 kW
Hydraulic circuit: steering	159 l
From the rear axle to the bumper	4195 mm
From the ground to the center of the axles	52 inches
Reach - Maximum lift	83 inches

Whether you need a loader for landscaping, agriculture, construction, waste management, forestry, or mining applications, Cat® wheel loaders ensure safety, speed, precision, and efficiency for all your material handling and loading tasks.