Chargeuse sur pneus 986K

Wheel loaders (CAT)

Les grosses chargeuses sur pneus Cat® sont conçues pour offrir une durée de vie maximale et garantir une disponibilité optimale, sur plusieurs cycles de vie. Grâce à leurs performances optimisées et leur entretien simplifié, nos machines vous permettent de déplacer plus de matériaux de manière plus sûre et plus efficace, et ce à un coût par tonne inférieur. La nouvelle 986K améliore davantage la durée de vie, les performances, la sécurité, le confort du conducteur, la facilité d'entretien et les caractéristiques relatives à la durabilité.

Net power278 kW
Operating weight44818 kg
Gross power – ISO 14396335 kW
Speed at maximum power - 1,600 rpm - SAE J1995340 kW
Speed at maximum power - 1,600 rpm - SAE J1995 (DIN)340 kW
Speed at maximum power: 1,600 rpm - ISO 14396335 kW
Speed at maximum power - 1,600 rpm - ISO 14396 (DIN)335 kW
Rated speed - 2,000 rpm - EEC 80/1269278 kW
Rated speed - 2,000 rpm - CEE 80/1269 (DIN)278 kW
Rated speed: 2,000 rpm - ISO 9249278 kW
Rated speed: 2,000 rpm - ISO 9249 (DIN)278 kW
Rated speed: 2,000 rpm - SAE J1349278 kW
Rated speed - 2,000 rpm - SAE J1349 (DIN)278 kW
Bore137 mm
Race6.7 inches
Engine displacement15.2 l
Maximum torque (1200 rpm) - SAE J19952411 N-m
Operating weight: standard44355 kg
Operating weight - high lift height47175 kg
Charge utile nominale - Face de carrière10 t
Charge utile nominale : matériau en vrac (standard)12.7 t
Charge utile nominale - Matériau en vrac (grande hauteur de levage)11 t
Charge utile nominale : standard (front de carrière)10 t
Rated payload: standard lifting (low to moderate excavation resistance)12.7 t
Charge utile nominale - Grande hauteur de levage (front de carrière)10 t
Rated payload: high lift height (low to moderate excavation resistance)11 t
Forward gear - 17.3 km/h
Forward gear – 212.2 km/h
Direct drive - Forward 212.7 km/h
Direct drive - Forward 322 km/h
Direct connection: forward 439 km/h
Reverse gear – 17.6 km/h
Reverse gear – 213.6 km/h
Direct connection - Reverse 214.1 km/h
Direct drive - Reverse 325 km/h
Direct plug - Reverse 440.8 km/h
Maximum output at 2,165 rpm470 l/min
Adjusting the relief valve - Lifting/tilting27,900 kPa
Lifting cylinder - Bore190 mm
Lifting cylinder - Stroke1138 mm
Tilt cylinder - Bore170 mm
Tilt cylinder - Stroke722 mm
Recovery4.5 s
Lifting9 s
Emptying3.5 s
Costs5.2 s
Lowering in free position4.3 s
Total hydraulic cycle time21.3 s
Fuel tank535 l
Réservoir de carburant - Petite hauteur de levage481 l
Cooling circuits100 l
Carter34 l
Diesel exhaust fluid tank (for Tier 4 Final/Stage IV only)23 l
Transmission75 l
Axle oil - Differentials and reduction gears - Front end186 l
Axle oil - Differentials and gearboxes - Rear170 l
Filling the hydraulic circuit at the factory330 l
Hydraulic circuit - Reservoir only130 l
ISO 5010:2007 - Maximum flow at 1,400 rpm200 l/min
ISO 5010:2007 - Steering cut-off pressure27600 kPa
Noise level inside cab (ISO 6396)72 dB(A)
Machine noise level (ISO 6395)112 dB(A)
Noise level inside cab (ISO 6396)72 dB(A)
Machine noise level (ISO 6395)110 dB(A)
From the ground to the top of the ROPS frame4100 mm
From the ground to the top of the exhaust pipes4060 mm
From the ground to the top of the hood3270 mm
From the ground to the center of the front axle978 mm
Ground clearance to fuel tank691 mm
Ground clearance relative to the bottom of the joint459 mm
Reach - Maximum lift2175 mm
Dump height at maximum lift3079 mm
Bucket pivot height – Maximum lift4912 mm
Maximum overall height - Bucket raised6817 mm
From the rear axle to the bumper3132 mm
Wheelbase3810 mm
Maximum overall length11143 mm
From the front axle to the end of the bucket4201 mm
From the ground to the top of the ROPS frame4100 mm
From the ground to the top of the exhaust pipes4060 mm
From the ground to the top of the hood3270 mm
From the ground to the center of the front axle978 mm
Ground clearance to fuel tank691 mm
Ground clearance relative to the bottom of the joint459 mm
Reach - Maximum lift2248 mm
Dump height at maximum lift3538 mm
Bucket pivot height – Maximum lift5371 mm
Maximum overall height - Bucket raised7276 mm
From the rear axle to the bumper3132 mm
Wheelbase3810 mm
Maximum overall length11591 mm
From the front axle to the end of the bucket18.3 feet

Whether you need a loader for landscaping, agriculture, construction, waste management, forestry, or mining applications, Cat® wheel loaders ensure safety, speed, precision, and efficiency for all your material handling and loading tasks.

Please fill out the form to receive the technical data sheets.

Wheel loaders (CAT)

995 wheel loader

994K wheel loader

993 wheel loader

993K wheel loader

992K wheel loader

992K wheel loader

By the same manufacturer

XES120 (60 Hz)

XES120 (50 Hz)

XES60 (60 Hz)

XES60 (50 Hz)

CN3586 electric gas compression motor

Electric motor CN5086

CN3086 Electric Gas Compression Motor

CN1566 electric motor

WS305 XD

Headband

Our news

The essentials of Neemba, in real time.