995 wheel loader

Wheel loaders (CAT)

The same size as the 994K but with a higher rated payload, the new Cat® 995 Wheel Loader delivers higher productivity and efficiency while consuming less fuel. It enables single-pass loading of Cat 785, 789, and 793 mining trucks. This translates to an increase in production and efficiency of up to 33 % when loading the 785, 25 % with the 789, and 20 % with the 793. With increased rated payload and hydraulic force, the 995 delivers up to 21% higher output and 24% higher productivity compared to the 994K. In Advanced Eco mode, the 995 delivered 31% higher efficiency and a 13% reduction in hourly fuel consumption compared to the 994K in throttle lock mode, resulting in a 23% reduction in CO2 per unit of material moved. It also offers a more comfortable driving environment, as well as features that help improve driver confidence while reducing fatigue.

Engine power – ISO 14396	1,377 kW
Gross power - SAE J1995:2014	1,394 kW
Net power - SAEJ1349 - Standard ambient temperature	1,297 kW
Net power - SAEJ1349 - High ambient temperature	1,265 kW
Bore	170 mm
Race	8.5 inches
Engine displacement	78.1 l
Maximum torque (1200 rpm) - SAE J1995	11,591 N·m
Operating weight: standard	246,651 kg
Operating weight - high lift height	248,421 kg
Rated payload: standard lifting (low to moderate excavation resistance)	54.4 t
Nominal payload: standard lifting (moderate to high excavation resistance)	45.3 t
Rated payload: high lift height (low to moderate excavation resistance)	49.9 t
Rated payload: high lift height (moderate to high excavation resistance)	45.3 t
Forward gear - 1	7.4 km/h
Forward gear – 2	12.9 km/h
Forward gear – 3	21.9 miles per hour
Reverse gear – 1	8.1 km/h
Reverse gear – 2	14.1 km/h
Reverse gear – 3	24 km/h
Direct drive - Forward 2	14 km/h
Direct drive - Forward 3	24.5 km/h
Direct connection - Reverse 2	15.5 km/h
Direct drive - Reverse 3	27 km/h
Maximum flow rate at an engine speed of 1700 rpm	2047 l/min
Adjusting the relief valve - Lifting/tilting	34,500 kPa
Recovery	4.9 s
Lifting	12.6 s
Emptying	3.1 s
Lowering in free position	4.2 s
Fuel tank, standard	3,240 l
Fuel tank, with 24-hour equipment	5350 l
Cooling circuit	520 l
Motor housing	288 l
Transmission	416 l
Differential - Gearboxes - Front	833 l
Differential - Gearboxes - Rear	757 l
Hydraulic reservoir: equipment and hydraulic fan	1022 l
Hydraulic reservoir: steering and braking	379 l
Oil replacement system (ORS)*	75.7 l
Variable speed hydraulic fan, ambient temperature capacity – Standard	43 °C
Variable speed hydraulic fan with ambient temperature capacity: high (Tier 1 equivalent)	93 °F
Variable speed hydraulic fan at ambient temperature: high* (Tier 4 Final)	53 °C
Driver noise level (ISO 6396:2008): equivalent to European Tier 1/Stage I	74 dB(A)
Machine sound level (ISO 6395:2008)	119 dB(A)
Driver noise level (ISO 6396:2008): equivalent to European Tier 1/Stage I	73 dB(A)
Machine sound level (ISO 6395:2008)	117 dB(A)
Steering cycle time – Idle speed	7.6 s
Steering cycle time - Maximum idle speed	4.3 s
Bucket pivot height – Maximum lift	8,800 mm
Dump height at maximum lift	239.5 inches
From the front axle to the end of the bucket	26.7 feet
Ground clearance relative to the bumper	53 inches
From the ground to the center of the axles	1830 mm
Ground clearance relative to the bottom of the joint	898 mm
From the ground to the top of the exhaust pipes	7067 mm
From the ground to the top of the hood	5682 mm
From the ground to the top of the ROPS frame	7119 mm
Maximum overall height - Bucket raised	11966 mm
Maximum overall length	19,693 mm
Reach - Maximum lift	115 inches
From the rear axle to the bumper	6205 mm
Bandwidth	4300 mm
Wheelbase	6800 mm
Width excluding tires, with protrusion	5758 mm
Bucket pivot height – Maximum lift	9657 mm
Dump height at maximum lift	27 feet
From the front axle to the end of the bucket	7383 mm
Ground clearance relative to the bumper	53 inches
From the ground to the center of the axles	1830 mm
Ground clearance relative to the bottom of the joint	898 mm
From the ground to the top of the exhaust pipes	7067 mm
From the ground to the top of the hood	5682 mm
From the ground to the top of the ROPS frame	7119 mm
Maximum overall height - Bucket raised	12823 mm
Maximum overall length	20,388 mm
Reach - Maximum lift	2884 mm
From the rear axle to the bumper	6205 mm
Bandwidth	4300 mm
Wheelbase	6800 mm
Width excluding tires, with protrusion	5760 mm

Whether you need a loader for landscaping, agriculture, construction, waste management, forestry, or mining applications, Cat® wheel loaders ensure safety, speed, precision, and efficiency for all your material handling and loading tasks.